How to remove an Ignition lock on Cosa?

Schaltroller / Classic Motoscooters Vespa Largeframe
1

   
Hello,

My lock barrel is on its way out (getitng very loose) so I would like to change it. I already have spare barrels but when I tried to remove the lock body (art no 25453600), I couldn’t figure out how to :s The whole thing would move in and out but would not come out, is there a latch or something??? Does anyone have any info?

Thanks,

Emmanuel

2

Cool, no I hadn’t tried that, I tried moving the lock body from end to end but not the steering head. I will try this weekend again :slight_smile:

Thanks,

Emmanuel

3

Have you tried turning the steering from lock to lock, as you pull on the metal piece?

4

Ahhh, thanks for the reply, My issue was that the metal locking piece would not come out, is there a trick?

Thanks,

Emmanuel

5

I'm trying to do the same, to replace the same item, even. Any more help available? Mine's an XL2, not sure if that makes any difference.

6

Ages since I did one, but!

If its like a p2/t5!? you take the horn cover off, and on the steering coloum thier is a grub screw holding in the plastic switch, this uncovers an actul locking piece of metal(falls out, I think!) behind this (with the key in the lock)a little tab holds the lock in place.

If its not like a p2/t5, Twat it! get a slide hammer (it pulls the lot out!breaking the tab) but... don't blame me if.........[:D]

7

Having the same problem know, anybody found the answer how to place a new lock body in so its stays in. Thanks