Has anyone successfully fitted indicators to a Vespa VBA/VBB/VNB model?
I also have 86137000 and when I purchased the first one, it didn't come with a diagram. I was told there is no diagram. Purchased another one for a customer and it came with a diagram, for a Super I think.
Can handle wiring it up but don't understand where the relay is wired in. There's 2 connectors, does it matter which one? I have both a 12V and 6V/12V flasher relay.
I have 2 options,
Option 1 - Indicators run off battery in glovebox.
Option 2 - Indicators run off stator.
I have been told to "run it off the headset" and other various vague pieces of advice. So amd still in the dark.
So I have wiring going like this;
Brown + White + Blue - Handlebar switch - Correct?
Red + White - ????
Red - ???
Blue - ???
Brown - ???
cheers
K.
Hi dude
Basically it´s really hard to advise you over the board with this electric question.
Regarding the flasher relay my recommendation would be to connect it between the light switch and the "main power cable".
Do you know some electrician to help you ?
cheers
The description says it fits GS150/GS160/VNA/VNB/VBA/VBB/T4/GL/Sprint.
I bought 2 of them.
One came loose with nothing else.
The other came in SIP packaging with a wiring diagram for a Super.
Hence my queries.
Yes.
Hi dude
I dont fixed this because you have to use the smallframe parts to realize.
Too much modifications !
Basically you have to notice that the hole indicator should stay in one position while the as and the shifting part is moving.
cheers
Any result?
Hi dude
I guess you have a 6v ignition ??
Ok, lets try:
Just install a indicator swich on your handlebar ( 60096000, 12195900) then you have to create a wiring that goes from the swich to the right and to the left indicator light.
Then you have to connect the current for the handlebar lights to the indicator relay (12225000) and this have to go to the ignition plate.
Hope this was helpfull .....
cheers
Hi dude
Do you´re talking about the handlebar indicators ?
cheers
Cheers
Have no prob with the physical installation.
Need help with the wiring.
K.