SERIE PRO front and rear hubs, modified to fit GTS 12" rim on PX EFL/T5,

Schaltroller / Classic Motoscooters Vespa Largeframe
1

Hello SIP team,

I have ordered your SERIE PRO hubs for my T5 and would like to know two things:

1) What speedo drive worm gear do I need for the front hub, is it a px drum type, a px disc type or a GTS type ?

2) Do I need to use the SIP wide tyre engine spacer on my engine to fit/centralise the GTS rim on the rear 0f the scooter ?

Thanks, ck064 - James.

Great Parts, Great Ideas, Great Team.

2

Hi dude

 

You`ll need the px lusso worm gear. I recommend to you the items 56405300 and 94430000.

 

Here are the recommendation reg. the tire:

SIP-TiPP: Tire 120/70-12, Valve 90900000, and  17761000, 17019000, 17744300, 17749500, Bremszange SIP # 56402000, # GF650W Bremsscheibe.

Hope this was helpfully.

 

cheers

3

Hello SIP Team,

I have the front hub ( 39042000 ) and it has no drive gear fitted to engage with 94430000, do I need 56387300  ?

4

Hello SIP Team,

Thanks for the response, but I don't think I was clear. The front hub does not have a drive gear on the engage with 94430000, to drive the speedo cable.

The hub has a shoulder and I wanted to know what part number the hub mounted drive gear would be ?

The second point on the rear hub involved getting the rear wheel to run central. Do I need to use the 10mm engine mounting spacer (supplied in the SIP wide tire kits) to move the engine across to keep the rear wheel central in the frame ?

Thank you again,  James - ck064 

5

Hi dude

 

So you´re not talking about the drive gear ? (94430000)

 

 

cheers