PLUG MY HOLE

HAVE JUST REBUILT A PX 210 AND GOT HER RUNNING PROBLEM IS THAT AS I FILL THE OIL IT DRIPS OUT OF A SMALL HOLE POSITIONED BEHIND AND BELOW THE REAR BRAKE BACKING PLATE DOES ANY ONE KNOW THE REASON FOR THIS ? THE REAR OIL SEAL IS NOT LEAKING AND IS 30 MM SHOULD IT BE 27MM PLEASE HELP BEFORE I SPLIT THE CASINGS AGAIN[:bounce:] [:bounce:] [:bounce:] [:bounce:] [:bounce:] [:bounce:]

Hi i had the same problem on my T5 i had to split the caseings and put a new hub oil seal in this cured it Gary[:drink:] [:dance1:] [:dance1:]

I think the hole is thier to stop oil getting on the brakes if it leaks?
I would carefully take the oil seal out and try it on the hub,it should be tight,as both hubs fit, someone might of changed the hub but not the seal, later ones had the seal inside infront of the bearing which might of failed then had one put on hub side of bearing?
If in doubt plug it!!!
as long as it stays out of the brakes!
slidingdog