Hey Leute,
ich muss euch mal eine Frage stellen aber zuerst beschreibe ich mal meinen Motor, soweit ich weiß habe ich einen PK Motor mit einem 75er DR, dass kleine Ritzel von der Primär hat 24 und das große 62 Zähne schräg, in einer Tabelle habe ich gelesen das dies, dass Standard Primär von Vespa 90 s, pk 125 usw. sei. Das bedeutet doch das, dass Primär schon für grössere Zylinder ausgelegt ist.
nun zu meiner Frage, könnte es sein das die Kurbelwelle auch schon stärker ist und ich somit ohne großen Aufwand zb. einen 125ccm oder 133ccm Zylinder drauf packen könnte?
Sorry about the English, but I don't speak German.
Although I'm not a technical expert, I can tell you something. Where I'm from, "upgrading" a PK75 to a PK125 by swapping the cylinder was very common in the 1990's. You can probably swap the cylinder for a bigger one, and you won't have problems in the SHORT run.
Maybe some clutch or gears problems could arise in the LONG run, I mean, after a few years. You need someone with more knowledge about this.
If need an example, take a look at this link:
http://www.sip-scootershop.com/files/catalogue/index.html#/89
Sebastian Wiemer (bottom left) uses a stock PX80 with a 135 cc and STOCK transmission.
Please excuse me if my reply didn't help you