P2 mixture screw setting

hi if i turn the mixture screw all the way in on my standard p2/carb how many turns out will i need to turn it to set the carb at pretty much standard/factory settings any help will be very welcome.

About 1,5

And what about a Dell’Orto PHBH30?

30mm is anywhere between 1 and 1.75 turns depending on engine set up. you should get a strong pop pop pop from the exhaust that doesnt sound like the engine is trying to race and doesnt sound likw its struggling to run. adjust tick over while adjusting mixture to give good running                                                                                                                                                                     7

many many thanks lads it’s the new bolt type i will gige it a go cheers[:D]

its 1.5 turns approx if its the old slot head screw type, if its the new 7mm nut head type its 2.5-3 turns as its a finer thread