Just wonder if anybody had any tips on converting to motorbike handelbars on a vespa. seen pictures, but how do you do it?
Hi, SIP sell a nice alloy yoke setup but it is pricey, then you need a handlebar gear changer (MBD do a good one). Another way is to use a Lambretta headset clamp (like you do on BEEDSPEED dropbars) and make a yoke from alloy plate, I use 8 or 10mm (or steel) then get motor bike handlebar risers (thousands of different shapes, sizes, heights and styles in all kinds of material) choose your bars and then get switches levers etc. I follow the shape of the Lambretta clamp and make a triangular yoke with the point at the back, (beedspeed drops use the clamp the other way round). At the front of the yoke I drill 2 holes with 100mm centres to bolt the risers in. Where the yoke sits over the hole in the steering column I drill a hole to let the cables out, but smaller than the hole in the stem so there is a lip to use as a gauge to fit it together.