Mikuni fuel pump

about to put a mikini fuel pump on my P200, does anyome now where the pipe the activates the diaphram goes on the engine, it’s a readvalve set up? 28mm PHBH Dellorto.
in advance


you have to drill a hole in the manifold as close as possible to the base either in the front or in the back of the manifold, it depends where you want to put your pump, if under the tank or outside somewhere on the engincases.
After you make the hole you can fit the 8mm tube that will pressure the pump with some cold weld alu or alu weld (if the 8mm tube is made out from alu).

Worth taking a look at page 14 of this forum RE; Dellorto fuel pump, and save some money.