malossi 136ccm compatability

does anyone know if the polini carburetor kit (J1770017) fits on the malossi 136ccm reed valve kit ( 15030000)? 

thanks for replies.

Hi,

your question is not really clear, but a 16 mm carburator on 136 Malossi can work, but makes not much sense. Normally is used a 24/25 mm carburator.

The malossi has 2 intake possibilities:

a) BEST USE of this cylinder: direkt into the cylinder - there you need a Malossi-reed-direkt intake for V50/ET3 or PK.

Your Polini-carburator kit will not fit  for DIRECT-intake of the Malossi cylinder or on the Malossi reed-case itself --whatever you think should fit together!

b) CRANKCASE-INTAKE: You can use your Polini-carburator kit as crankcase-intake and close the window of the Malossi-cylinder. You can buy/change (when you have the money) later to direct intake with a 25 mm Carb. Kit, costs approx. EUR 220.-!

I hope I could help.

Best regards,

Christian[quote user="lowey92"]

does anyone know if the polini carburetor kit (J1770017) fits on the malossi 136ccm reed valve kit ( 15030000)? 

thanks for replies.

[/quote][quote user="lowey92"]

 

does anyone know if the polini carburetor kit (J1770017) fits on the malossi 136ccm reed valve kit ( 15030000)? 

thanks for replies.

[/quote][quote user="lowey92"]

 

does anyone know if the polini carburetor kit (J1770017) fits on the malossi 136ccm reed valve kit ( 15030000)? 

thanks for replies.

[/quote]