got a malossi 210 and the instructions say advance angle :18 [BTDC].do i move the back plate clockwise or anti clockwise. and how many millimetres,what grade plug,got 30 dellorto carb,sip performance exhaust,sip lightened flywheel,any advice on tuning and set-up,dont want a lot do i,great to have the passion for scooters back again after a few years away,thanks alan young.[:dance3:] : [:dance1:] [:bounce:]
18 degrees is the IT mark on a px200 stator, you should have 2 marks, A & IT, A is 23 degrees and IT is 18 degrees, just use the IT mark and all will be fine. The plug to use is a B9ES or equivalent.
Hey,
I have rally 200 and malossi 210 on it. The problem is that I haven´t found any more horses than with the standard cylinder. I have adjusted ignition both side. I suppose that ignition must be 18-19 btdc so it´s little before than original. Main jet is 135 with the si24 carburettor. Help!