How do I change the pads in the Grimeca semi-hydralic disk brake?

Hi, I have converted my Rally180 to the Grimeca semi-hydralic disk brake, PK fork, and ET2/4 shock (it fits with mild modification). I got some grease on the disk which was picked up by the pads and contaminated them. I want to take the pads out and inspect them, and probably replace them.

How do I remove the pads?

Thanks in advance for any help
David

hi,

 

pull off your tire with wheel. open the two screws from caliper. pull off the little c-clip from the brakepad pin. pull out the pin that the pads hold. change the pads. reassemble it as disassembled.

and dont forget to put some copper paste on the back side of the pads!

greets