Easy timing setting?

I am about to set the ignition on my vespa with a polini 208, have never done it before, and wonder how many degress the timing is when the mark on the casings and the mark on the stator plate line up ?
How much (in mm please) do i need to rotate the stator plate to get to 19 degress ? Clockwise or counter clockwise?

Thanks a lot leif…

The circumference of the stator plate is 360 mm, so 1 mm is 1 degree. If you now have 23 degrees, you should turn the stator plate 4 mm clockwise to get 19 degrees. As the factory setting might not be right, you are better of if you use a strobe light.

Leif

[:dance1:] [:dance1:]