Cosa clutch for t5

I HAVE A T5 ENGINE WITH MALOSSI 172 KIT,REEDVALVE ETC. A COUPLE OF WEEKS AGO THE COSA CLUTCH DISINTERGRATED, SO I REBUILT THE ENGINE WITH A REINFOCED COSA CLUTCH BUT I CANNOT GET THE CLUTCH TO WORK PROPERLY(IT IS DRAGGING ALL THE TIME ) ANY HELP WOULD BE APPRECIATED LIKE DID I PUT IT BACK TOGETHER PROPERLY ? IS A 21 TOOTH CLUTCH THE RIGHT ONE?ETC?

This is common but difficult to sort if the clutch is already banded. What you need to do is file or dremmel the base of the turrets the plates sit into to a depth of 21mm. This allows the plates to seperate more easily and stop the drag. Make sure you radius the corners after filing as this will create a stress point.

ok cheers, i’ll try it out[;)]

[:rotate:] THANK YOU VERY MUCH DIABLO[:rotate:] I FILED DOWN 1.5MM BETWEEN THE TURRETS AND THE CLUTCH WORKS SWEET AS A NUT NOW, CHEERS I OWE YOU ONE;D