4 plate clutch malossi or 3 plate clutch piaggio with renforced spring, this is the problem

Schaltroller / Classic Motoscooters Vespa Largeframe
1

your opinion! please thanks!!

4 plate clutch malossi or 3 plate clutch piaggio with renforced spring?

i have make this motor:

-work carter and valve

-177 polini work by worb5

-crack mazzuchelli 57 mm  

-si26/26

-gear 23/64 malossi for work with clucht p200

-hp4

- new clucht reinforced mmw racing p200x

and now your opinion! thanks

2

hi thanks to reply!

ok but.. do you think that i must renforce Clutch basket MMW P200E / PX200E? with ring?

3
I agreed to say that a my previous problem has been "sip reinforced clutch basket, because the ring press the basket, you don't modify the plate, you must work the bascket" and i thinking also for you.
ok, when try mmw basket i made a post ;).
we feel ourselves soon
Pietro
4

hi, thank to reply.. no problem for english, also my english is not good..

you wrote: "hp4 power or crank unbalance?  i don't know.

the clutch plates corner broken with a fully circle shape, and made the clutch slip"

i have understand that the problem is sip reinforced clutch basket, because the ring press the basket, you don't modify the plate, you must work the bascket..

Now i have but this article 93232000, i think is good! I will know to say it to you when I try it.

bye bye

Pietro

5

any! but always reinforced the basket

6

3 plate clutch have a better matching when the motor start/change gear.

4 plate clutch with a little slip when start/change gear.

 

i have used both, both are strong/XXXL springs.

 

but both are very easy to damage because the hp4 flywheel......

hp4 power or crank unbalance?  i don't know.

the clutch plates corner broken with a fully circle shape, and made the clutch slip...

 

also, my sip reinforced clutch basket have damaged within 3 weeks......

and my original 7springs clutch have no problem except clutch plates damaged.

 

i like 3 plates clutch more than 4 plates reinforced clutch.

 

my english is not good...

PX200 in Hong Kong

7

[quote user=„pietro.mileto“]

hi, thank to reply.. no problem for english, also my english is not good..

you wrote: "hp4 power or crank unbalance?  i don't know.

the clutch plates corner broken with a fully circle shape, and made the clutch slip"

i have understand that the problem is sip reinforced clutch basket, because the ring press the basket, you don't modify the plate, you must work the bascket..

Now i have but this article 93232000, i think is good! I will know to say it to you when I try it.

bye bye

Pietro

[/quote]

 

there is no problems when i used original flywheel.

when changing HP4, the clutch plates have damaged.

maybe HP4 power in high rpm cause they damaged, or HP4 too light and make the crank unbalance at two sides......

my HP4 also damaged, the fan and HP4 divided into 2 parts and the screws was broken......

 

remember tell me the result if you try to use the mmw clutch basket.

 

i think the cosa reinforced clutch better than 3 plates clutch, but it is not......

i think sip performance exhaust is better than rz mark one rh with my car, but it is not......

i think AddOnV is a useful unit, but for me it is not......

waste much money for trying..............................